Features of the HKURCEID - Air Handling
The air in the facility passes through both pre-filters (Figure 1) and HEPA filters (Figure 2) contained in a
filter housing above the work area (Figures 3 and 4).
The pressure differentials in the laboratory are measured using Magnehelic gauges (Figure 5) and the pressure
is shown outside the laboratory on a panel (Figure 6).
The HEPA filters are tested at regular intervals (Figures 7 and 8).
The integrity of the whole facility was tested using a pressure decay test (AS/NZS 2243.3: 2002) (Figure 9).
The variable speed fans that control the air supply are located in a plant room outside the secure facility.
This makes access for servicing straight forward.
|